PE Insulated, LSZH Sheathed & Overall Shielded Instrumentation Cable (Multi-Core) 90°C / 500V

Product Structure

rated voltage

500V

electric conductor

IEC 60228 standard for Category 2 multi-strand annealed copper conductors.

insulation

PE insulation

Full Shielding

The outer layer of the cable is wrapped with aluminum foil/plastic film featuring 0.5 mm² tin-plated copper current distributors.

oversheath

The EN 50290-2-27 standard specifies LSZH compound. Properties such as UV protection, resistance to hydrocarbons, oil resistance, rodent resistance, and termite resistance are optional.

pigment

Insulation: Black/Blue. Paired cables are sequentially numbered (1, 2,..., etc.) on the blue conductors.

External sheath: Black or blue (for intrinsically safe systems)

Technical Data

Physical Characteristics

Working temperature range (in the fixed state)

-30°C – +90°C

Installation temperature range (operating condition)

-5°C– +50°C

minimum bending radius

7.5 X outer diameter

UV Resistance

UL 1581 section 1200

Oil-resistant

ICEA S-73-532 (Test temperature: +60°C, duration: 4 hours. During the 4-hour period, the minimum values of tensile strength and elongation shall be maintained at 60%).

Product Features

Behaviour Of Electricity

Conductor cross-sectional area

MM2

0.5

0.75

1

1.3

1.5

2.5

Nominal insulation thickness

MM

0.55

0.55

0.55

0.6

0.6

0.7

Conductor resistance (20°C)

Ω/KM

36.0

24.5

18.1

13.9

12.1

7.4

Insulation Resistance (20°C)

MΩ.KM(MIN.)

5000

Interacting capacitance (1 kHz)

PF/M(MAX.)

115

Capacitive imbalance value (1 kHz)

PF/500 M (MAX.)

500

Inductance Factor/Impedance Ratio

ΜH/Ω(MAX.)

25

25

25

40

40

60

working voltage

V

500

Test voltage URMS

Voltage between the wire cores

2000

V between the conductor and the shield

2000

Application Scope

BS EN 50288-7 standard instrumentation cables are used for the transmission of analog and digital signals in instrumentation control systems. According to IEC79-14 classification, they can be used in Group II Zone 1 and Zone 2 environments, but cannot be directly connected to low-impedance power sources such as public power supply stations.
Recommended for indoor and outdoor installation, on supports, trays, pipes, in dry and humid environments; direct burial is not recommended.
Recommended for fire protection measures for life and important property.

技术参数

电缆型号	芯数×1×截面积	标准绝缘厚度	标准护套厚度	标称总外径	标称总重量
电缆型号	No.x1xmm2	mm	mm	mm	kg/km
0.5mm²,多芯	2x1x0.5	0.55	0.9	6.2	45
	3x1x0.5	0.55	0.9	6.5	53
	4x1x0.5	0.55	0.9	7	60
	5x1x0.5	0.55	0.9	7.6	71
	8x1x0.5	0.55	1	9.1	95
	10x1x0.5	0.55	1	10.4	122
	12x1x0.5	0.55	1	10.7	145
	14x1x0.5	0.55	1	11.3	162
	16x1x0.5	0.55	1.1	11.8	180
	20x1x0.5	0.55	1.1	13.3	214
	24x1x0.5	0.55	1.1	14.7	258
	27x1x0.5	0.55	1.2	15	282
	30x1x0.5	0.55	1.2	15.7	308
	37x1x0.5	0.55	1.2	16.9	372
	40x1x0.5	0.55	1.2	17.6	398
0.75mm²，多芯	2x1x0.75	0.55	0.9	6.5
	3x1x0.75	0.55	0.9	6.9
	4x1x0.75	0.55	0.9	7.4
	5x1x0.75	0.55	0.9	8.1
	8x1x0.75	0.55	1	9.7
	10x1x0.75	0.55	1	11.1
	12x1x0.75	0.55	1	11.5
	14x1x0.75	0.55	1.1	12.2
	16x1x0.75	0.55	1.1	12.9
	20x1x0.75	0.55	1.1	14.3
	24x1x0.75	0.55	1.2	16.0
	27x1x0.75	0.55	1.2	16.3
	30x1x0.75	0.55	1.2	16.9
	37x1x0.75	0.55	1.2	18.2
	40x1x0.75	0.55	1.3	19.1
1.0mm²，多芯	2x1x1.0	0.55	0.9	6.9	58
	3x1x1.0	0.55	0.9	7.3	70
	4x1x1.0	0.55	0.9	7.9	85
	5x1x1.0	0.55	0.9	8.6	98
	8x1x1.0	0.55	1	10.3	136
	10x1x1.0	0.55	1	11.9	194
	12x1x1.0	0.55	1	12.2	214
	14x1x1.0	0.55	1.1	13	243
	16x1x1.0	0.55	1.1	13.7	280
	20x1x1.0	0.55	1.1	15.2	336
	24x1x1.0	0.55	1.2	17	404
	27x1x1.0	0.55	1.2	17.4	443
	30x1x1.0	0.55	1.2	18	484
	37x1x1.0	0.55	1.2	19.6	590
	40x1x1.0	0.55	1.3	20.4	632
1.3mm²，多芯	2x1x1.3	0.6	0.9	7.4	72
	3x1x1.3	0.6	0.9	7.9	86
	4x1x1.3	0.6	0.9	8.5	105
	5x1x1.3	0.6	1	9.5	135
	8x1x1.3	0.6	1	11.2	176
	10x1x1.3	0.6	1.1	13.2	228
	12x1x1.3	0.6	1.1	13.6	269
	14x1x1.3	0.6	1.1	14.3	305
	16x1x1.3	0.6	1.1	15	351
	20x1x1.3	0.6	1.2	16.9	423
	24x1x1.3	0.6	1.2	18.7	507
	27x1x1.3	0.6	1.3	19.3	558
	30x1x1.3	0.6	1.3	20	611
	37x1x1.3	0.6	1.3	21.6	743
	40x1x1.3	0.6	1.4	22.7	796
1.5mm²，多芯	2x1x1.5	0.6	0.9	7.7	78
	3x1x1.5	0.6	0.9	8.1	94
	4x1x1.5	0.6	0.9	8.8	116
	5x1x1.5	0.6	1	9.8	149
	8x1x1.5	0.6	1	11.6	196
	10x1x1.5	0.6	1.1	13.7	261
	12x1x1.5	0.6	1.1	14.1	300
	14x1x1.5	0.6	1.1	14.8	340
	16x1x1.5	0.6	1.1	15.6	392
	20x1x1.5	0.6	1.2	17.6	474
	24x1x1.5	0.6	1.3	19.6	567
	27x1x1.5	0.6	1.3	20.1	625
	30x1x1.5	0.6	1.3	20.8	685
	37x1x1.5	0.6	1.4	22.6	834
	40x1x1.5	0.6	1.4	23.6	898
2.5mm²，多芯	2x1x2.5	0.7	0.9	8.9	113
	3x1x2.5	0.7	1	9.7	145
	4x1x2.5	0.7	1	10.5	178
	5x1x2.5	0.7	1	11.9	285
	8x1x2.5	0.7	1.1	13.9	376
	10x1x2.5	0.7	1.2	16.3	426
	12x1x2.5	0.7	1.2	16.9	537
	14x1x2.5	0.7	1.2	17.7	609
	16x1x2.5	0.7	1.3	18.9	711
	20x1x2.5	0.7	1.3	21.1	826
	24x1x2.5	0.7	1.4	23.6	930
	27x1x2.5	0.7	1.4	24.1	1040
	30x1x2.5	0.7	1.5	25.2	1142
	37x1x2.5	0.7	1.5	27.2	1392
	40x1x2.5	0.7	1.6	28.5	1494
注：根据供需双方协议，可以生产其他规格的产品。

rated voltage	500V
electric conductor	IEC 60228 standard for Category 2 multi-strand annealed copper conductors.
insulation	PE insulation
Full Shielding	The outer layer of the cable is wrapped with aluminum foil/plastic film featuring 0.5 mm² tin-plated copper current distributors.
oversheath	The EN 50290-2-27 standard specifies LSZH compound. Properties such as UV protection, resistance to hydrocarbons, oil resistance, rodent resistance, and termite resistance are optional.
pigment	Insulation: Black/Blue. Paired cables are sequentially numbered (1, 2,..., etc.) on the blue conductors. External sheath: Black or blue (for intrinsically safe systems)

Working temperature range (in the fixed state)	-30°C – +90°C
Installation temperature range (operating condition)	-5°C– +50°C
minimum bending radius	7.5 X outer diameter
UV Resistance	UL 1581 section 1200
Oil-resistant	ICEA S-73-532 (Test temperature: +60°C, duration: 4 hours. During the 4-hour period, the minimum values of tensile strength and elongation shall be maintained at 60%).

Conductor cross-sectional area	MM2	0.5	0.75	1	1.3	1.5	2.5
Nominal insulation thickness	MM	0.55	0.55	0.55	0.6	0.6	0.7
Conductor resistance (20°C)	Ω/KM	36.0	24.5	18.1	13.9	12.1	7.4
Insulation Resistance (20°C)	MΩ.KM(MIN.)	5000
Interacting capacitance (1 kHz)	PF/M(MAX.)	115
Capacitive imbalance value (1 kHz)	PF/500 M (MAX.)	500
Inductance Factor/Impedance Ratio	ΜH/Ω(MAX.)	25	25	25	40	40	60
working voltage	V	500
Test voltage URMS	Voltage between the wire cores	2000
Test voltage URMS	V between the conductor and the shield	2000