Product Structure
· Temperature range: -65~＋200℃; +250℃
· Rated voltage: U0/U 300/500V
· Test voltage: 1500V
· Insulation resistance: at 20℃ should not be less than 1.0×10³ MΩ·km
· Radiation resistance: up to 1×10⁶ cJ/kg (up to 1 Mrad)
Technical Data
Temperature range-65~200+250
Rated voltage U0/U 300/500V
Test voltage 1500V
Insulation resistance 20 should not be less than 1.010³ MΩkm
Radiation resistance up to 110⁶ cJ/kg (up to 1 Mrad
Product Features
· Excellent corrosion resistance, resistant to oils, strong acids, strong alkalis, strong oxidants, and microorganisms; prevents any fungal formation, etc.
· Excellent electrical insulation properties, with low and nearly frequency-independent dielectric characteristics; high voltage resistance, low high-frequency loss, non-hygroscopic, water absorption rate < 0.01%; Minimum water vapor permeability (approx. 0.18 mgr/cm² over 24 hours), high insulation resistance.
· Non-flammable, self-extinguishing. Flame retardancy test complies with DIN VDE 0482 Part 265-2-1 / EN 50265-2-1 / IEC 60332-1 (equivalent to DIN VDE 0472 Part 804 Test Method B).
· Free of hazardous substances, compliant with ROHS standards.
Application Scope
· In the electronics industry, can be used for temperature compensation wires, low-temperature/high-temperature heating wires, aging-resistant wires, and flame-retardant wires.
· In the household appliance industry, can be used for internal wiring of air conditioners, microwave ovens, electronic disinfection cabinets, lighting fixtures, etc.
· Mainly used in control cabinets affected by high heat effects, as well as in brick factories, heaters, kitchen equipment, measuring equipment, and the chemical industry; these cables are non-flammable and resistant to acids, alkalis, solvents, oils, and gasoline.
技术参数
|
芯数×截面(mm²)
|
导体结构根数/外径(mm)
|
绝缘
|
护套
|
|
厚度(mm)
|
外径(mm)
|
厚度(mm)
|
外径(mm)
|
|
2×0.12
|
7/0.15
|
0.20
|
0.85
|
0.25
|
2.20
|
|
3×0.12
|
7/0.15
|
0.20
|
0.85
|
0.25
|
2.30
|
|
4×0.12
|
7/0.15
|
0.20
|
0.85
|
0.25
|
2.60
|
|
5×0.12
|
7/0.15
|
0.20
|
0.85
|
0.25
|
2.80
|
|
6×0.12
|
7/0.15
|
0.20
|
0.85
|
0.25
|
3.10
|
|
7×0.12
|
7/0.15
|
0.20
|
0.85
|
0.30
|
3.15
|
|
10×0.12
|
7/0.15
|
0.20
|
0.85
|
0.30
|
4.00
|
|
12×0.12
|
7/0.15
|
0.20
|
0.85
|
0.30
|
4.20
|
|
19×0.12
|
7/0.15
|
0.20
|
0.85
|
0.35
|
5.00
|
|
2×0.2
|
7/0.20
|
0.20
|
1.00
|
0.25
|
2.50
|
|
3×0.2
|
7/0.20
|
0.20
|
1.00
|
0.25
|
2.60
|
|
4×0.2
|
7/0.20
|
0.20
|
1.00
|
0.25
|
2.90
|
|
5×0.2
|
7/0.20
|
0.20
|
1.00
|
0.25
|
3.20
|
|
6×0.2
|
7/0.20
|
0.20
|
1.00
|
0.30
|
3.60
|
|
7×0.2
|
7/0.20
|
0.20
|
1.00
|
0.30
|
3.60
|
|
10×0.2
|
7/0.20
|
0.20
|
1.00
|
0.30
|
4.60
|
|
12×0.2
|
7/0.20
|
0.20
|
1.00
|
0.30
|
4.70
|
|
19×0.2
|
7/0.20
|
0.20
|
1.00
|
0.40
|
5.80
|
|
2×0.35
|
19/0.16
|
0.25
|
1.30
|
0.25
|
3.10
|
|
3×0.35
|
19/0.16
|
0.25
|
1.30
|
0.25
|
3.20
|
|
4×0.35
|
19/0.16
|
0.25
|
1.30
|
0.25
|
3.65
|
|
5×0.35
|
19/0.16
|
0.25
|
1.30
|
0.30
|
4.10
|
|
6×0.35
|
19/0.16
|
0.25
|
1.30
|
0.30
|
4.50
|
|
7×0.35
|
19/0.16
|
0.25
|
1.30
|
0.30
|
4.50
|
|
8×0.35
|
19/0.16
|
0.25
|
1.30
|
0.30
|
4.90
|
|
10×0.35
|
19/0.16
|
0.25
|
1.30
|
0.40
|
6.00
|
|
12×0.35
|
19/0.16
|
0.25
|
1.30
|
0.40
|
6.20
|
|
19×0.35
|
19/0.16
|
0.25
|
1.30
|
0.40
|
7.30
|
|
注：根据供需双方协议，可以生产其他规格的产品。
|
