Product Structure
Multiple stranded soft conductor of tinned and silver-plated copper wire
For the performance of tinned copper wire, refer to GB/T 4910-2009; for the performance of silver-plated copper wire, refer to JB/T 3135-2011; for the conductor structure, refer to GB/T 3956-2008 or customer requirements
FEP (fluorinated ethylene propylene) insulation; PFA (perfluoroalkoxy) insulation
For the performance of insulating materials, refer to GJB 773A-2000; for the dimensions of finished wires and cables, refer to GB/T 2951-2008; for the electrical performance of finished wires and cables, refer to GB/T 3048-2007
Tinned or silver-plated braided shield
FEP (fluorinated ethylene propylene) sheath; PFA (perfluoroalkoxy) sheath
For the performance of sheath materials, refer to GJB 773A-2000; for the dimensions of finished wires and cables, refer to GB/T 2951-2008; for the electrical performance of finished wires and cables, refer to GB/T 3048-2007
Technical Data
Temperature range: -65~＋200℃; +250℃\nRated voltage: U0/U 300V\nTest voltage: 1500V\nInsulation resistance: at 20℃ should not be less than 1.0×10³ MΩ·km\nRadiation resistance: up to 1x10⁶ cJ/kg (up to 1 Mrad)
Product Features
· Excellent corrosion resistance, resistant to oils, strong acids, strong alkalis, strong oxidants, and microorganisms; prevents any fungal formation.
· Excellent electrical insulation properties, with low and nearly frequency-independent dielectric characteristics; high voltage resistance, low high-frequency loss, non-hygroscopic, water absorption rate < 0.01%; Minimum water vapor permeability (approx. 0.18 mgr/cm² over 24 hours), high insulation resistance.
· Non-flammable, self-extinguishing. Flame retardancy test complies with DIN VDE 0482 Part 265-2-1 / EN 50265-2-1 / IEC 60332-1.
· Free of hazardous substances, compliant with ROHS standards.
Application Scope
In the electronics industry, can be used for temperature compensation wires, low-temperature/high-temperature heating wires, aging-resistant wires, and flame-retardant wires.
In the household appliance industry, can be used for internal wiring of air conditioners, microwave ovens, electronic disinfection cabinets, lighting fixtures, etc.
Mainly used in control cabinets affected by high heat effects, as well as in brick factories, heaters, kitchen equipment, measuring equipment, and the chemical industry; this type of cable is non-flammable and resistant to acids, alkalis, solvents, oils, and gasoline.
技术参数
|
芯数x截面(mm2)
|
导体结构根数/线径(mm)
|
绝缘
|
护套
|
20℃时导体直流电阻(Ω/km)
|
|
厚度mm
|
外径mm
|
厚度mm
|
外径mm
|
|
1×0.12
|
7/0.15
|
0.20
|
0.85
|
0.20
|
1.70
|
150
|
|
1×0.2
|
7/0.20
|
0.20
|
1.0
|
0.20
|
1.90
|
83.5
|
|
1×0.35
|
19/0.16
|
0.25
|
1.30
|
0.25
|
2.20
|
49.5
|
|
1×0.5
|
19/0.18
|
0.25
|
1.40
|
0.25
|
2.40
|
36.0
|
|
1×0.75
|
19/0.23
|
0.25
|
1.70
|
0.25
|
2.70
|
22.7
|
|
1×1.0
|
19/0.26
|
0.25
|
1.80
|
0.25
|
2.80
|
19.0
|
|
2×0.035
|
7/0.08
|
0.20
|
0.65
|
0.20
|
2.20
|
525
|
|
3×0.05
|
7/0.10
|
0.20
|
0.70
|
0.25
|
2.40
|
330
|
|
3×0.08
|
7/0.12
|
0.20
|
0.78
|
0.25
|
2.50
|
227
|
|
4×0.08
|
7/0.12
|
0.20
|
0.78
|
0.25
|
2.80
|
227
|
|
6×0.08
|
7/0.12
|
0.20
|
0.78
|
0.25
|
3.20
|
227
|
|
2×0.12
|
7/0.15
|
0.20
|
0.85
|
0.25
|
2.70
|
150
|
|
3×0.12
|
7/0.15
|
0.20
|
0.85
|
0.25
|
2.70
|
150
|
|
4×0.12
|
7/0.15
|
0.20
|
0.85
|
0.25
|
3.0
|
150
|
|
5×0.12
|
7/0.15
|
0.20
|
0.85
|
0.30
|
3.30
|
150
|
|
6×0.12
|
7/0.15
|
0.20
|
0.85
|
0.30
|
3.60
|
150
|
|
7×0.12
|
7/0.15
|
0.20
|
0.85
|
0.30
|
3.60
|
150
|
|
8×0.12
|
7/0.15
|
0.20
|
0.85
|
0.30
|
3.90
|
150
|
|
10×0.12
|
7/0.15
|
0.20
|
0.85
|
0.30
|
4.50
|
150
|
|
12×0.12
|
7/0.15
|
0.20
|
0.85
|
0.30
|
4.60
|
150
|
|
19×0.12
|
7/0.15
|
0.20
|
0.85
|
0.35
|
5.50
|
150
|
|
2×0.2
|
7/0.20
|
0.20
|
1.0
|
0.25
|
2.90
|
83.5
|
|
3×0.2
|
7/0.20
|
0.20
|
1.0
|
0.25
|
3.00
|
83.5
|
|
4×0.2
|
7/0.20
|
0.20
|
1.0
|
0.30
|
3.50
|
83.5
|
|
5×0.2
|
7/0.20
|
0.20
|
1.0
|
0.30
|
3.80
|
83.5
|
|
6×0.2
|
7/0.20
|
0.20
|
1.0
|
0.30
|
4.20
|
83.5
|
|
7×0.2
|
7/0.20
|
0.20
|
1.0
|
0.30
|
4.20
|
83.5
|
|
8×0.2
|
7/0.20
|
0.20
|
1.0
|
0.35
|
4.50
|
83.5
|
|
10×0.2
|
7/0.20
|
0.20
|
1.0
|
0.35
|
5.20
|
83.5
|
|
12×0.2
|
7/0.20
|
0.20
|
1.0
|
0.35
|
5.40
|
83.5
|
|
19×0.2
|
7/0.20
|
0.20
|
1.0
|
0.40
|
6.40
|
83.5
|
|
2×0.35
|
19/0.16
|
0.25
|
1.30
|
0.25
|
3.50
|
49.5
|
|
3×0.35
|
19/0.16
|
0.25
|
1.30
|
0.25
|
3.60
|
49.5
|
|
4×0.35
|
19/0.16
|
0.25
|
1.30
|
0.30
|
4.25
|
49.5
|
|
5×0.35
|
19/0.16
|
0.25
|
1.30
|
0.35
|
4.70
|
49.5
|
|
6×0.35
|
19/0.16
|
0.25
|
1.30
|
0.35
|
5.00
|
49.5
|
|
7×0.35
|
19/0.16
|
0.25
|
1.30
|
0.35
|
5.10
|
49.5
|
|
8×0.35
|
19/0.16
|
0.25
|
1.30
|
0.35
|
5.50
|
49.5
|
|
10×0.35
|
19/0.16
|
0.25
|
1.30
|
0.40
|
6.50
|
49.5
|
|
12×0.35
|
19/0.16
|
0.25
|
1.30
|
0.40
|
6.70
|
49.5
|
|
19×0.35
|
19/0.16
|
0.25
|
1.30
|
0.50
|
8.0
|
49.5
|
|
2×0.5
|
19/0.18
|
0.25
|
1.40
|
0.25
|
3.80
|
36.0
|
|
3×0.5
|
19/0.18
|
0.25
|
1.40
|
0.25
|
3.90
|
36.0
|
|
4×0.5
|
19/0.18
|
0.25
|
1.40
|
0.30
|
4.60
|
36.0
|
|
5×0.5
|
19/0.18
|
0.25
|
1.40
|
0.35
|
5.0
|
36.0
|
|
6×0.5
|
19/0.18
|
0.25
|
1.40
|
0.35
|
5.40
|
36.0
|
|
7×0.5
|
19/0.18
|
0.25
|
1.40
|
0.35
|
5.40
|
36.0
|
|
8×0.5
|
19/0.18
|
0.25
|
1.40
|
0.35
|
5.90
|
36.0
|
|
10×0.5
|
19/0.18
|
0.25
|
1.40
|
0.40
|
7.0
|
36.0
|
|
12×0.5
|
19/0.18
|
0.25
|
1.40
|
0.40
|
7.20
|
36.0
|
|
19×0.5
|
19/0.18
|
0.25
|
1.40
|
0.50
|
8.50
|
36.0
|
|
20×0.6
|
19/0.20
|
0.25
|
1.50
|
0.50
|
9.50
|
36.0
|
|
2×0.75
|
19/0.23
|
0.25
|
1.70
|
0.30
|
4.60
|
22.7
|
|
3×0.75
|
19/0.23
|
0.25
|
1.70
|
0.40
|
4.80
|
22.7
|
|
4×0.75
|
19/0.23
|
0.25
|
1.70
|
0.40
|
5.50
|
22.7
|
|
5×0.75
|
19/0.23
|
0.25
|
1.70
|
0.40
|
6.0
|
22.7
|
|
6×0.75
|
19/0.23
|
0.25
|
1.70
|
0.40
|
6.40
|
22.7
|
|
7×0.75
|
19/0.23
|
0.25
|
1.70
|
0.40
|
6.40
|
22.7
|
|
8×0.75
|
19/0.23
|
0.25
|
1.70
|
0.40
|
6.90
|
22.7
|
|
10×0.75
|
19/0.23
|
0.25
|
1.70
|
0.40
|
8.20
|
22.7
|
|
12×0.75
|
19/0.23
|
0.25
|
1.70
|
0.50
|
8.50
|
22.7
|
|
19×0.75
|
19/0.23
|
0.25
|
1.70
|
0.60
|
10.20
|
22.7
|
|
2×1
|
19/0.26
|
0.25
|
1.80
|
0.30
|
4.70
|
19
|
|
3×1
|
19/0.26
|
0.25
|
1.80
|
0.35
|
4.80
|
19
|
|
4×1
|
19/0.26
|
0.25
|
1.80
|
0.40
|
5.60
|
19
|
|
5×1
|
19/0.26
|
0.25
|
1.80
|
0.40
|
6.20
|
19
|
|
6×1
|
19/0.26
|
0.25
|
1.80
|
0.40
|
6.80
|
19
|
|
7×1
|
19/0.26
|
0.25
|
1.80
|
0.40
|
6.80
|
19
|
|
8×1
|
19/0.26
|
0.25
|
1.80
|
0.40
|
7.30
|
19
|
|
10×1
|
19/0.26
|
0.25
|
1.80
|
0.50
|
8.80
|
19
|
|
12×1
|
19/0.26
|
0.25
|
1.80
|
0.50
|
9.0
|
19
|
|
19×1
|
19/0.26
|
0.25
|
1.80
|
0.60
|
10.80
|
19
|
|
2×1.5
|
19/0.32
|
0.30
|
2.25
|
0.40
|
5.80
|
11.7
|
|
3×1.5
|
19/0.32
|
0.30
|
2.25
|
0.40
|
6.0
|
11.7
|
|
4×1.5
|
19/0.32
|
0.30
|
2.25
|
0.40
|
6.80
|
11.7
|
|
5×1.5
|
19/0.32
|
0.30
|
2.25
|
0.40
|
7.50
|
11.7
|
|
6×1.5
|
19/0.32
|
0.30
|
2.25
|
0.50
|
8.40
|
11.7
|
|
7×1.5
|
19/0.32
|
0.30
|
2.25
|
0.50
|
8.40
|
11.7
|
|
8×1.5
|
19/0.32
|
0.30
|
2.25
|
0.50
|
9.0
|
11.7
|
|
10×1.5
|
19/0.32
|
0.30
|
2.25
|
0.50
|
10.50
|
11.7
|
|
12×1.5
|
19/0.32
|
0.30
|
2.25
|
0.60
|
11.20
|
11.7
|
|
19×1.5
|
19/0.32
|
0.30
|
2.25
|
0.70
|
13.20
|
11.7
|
|
2×2.5
|
19/0.41
|
0.40
|
2.80
|
0.40
|
7.0
|
11.7
|
|
3×2.5
|
19/0.41
|
0.40
|
2.80
|
0.40
|
7.20
|
6.86
|
|
4×2.5
|
19/0.41
|
0.40
|
2.80
|
0.40
|
8.20
|
6.86
|
|
5×2.5
|
19/0.41
|
0.40
|
2.80
|
0.50
|
9.20
|
6.86
|
|
6×2.5
|
19/0.41
|
0.40
|
2.80
|
0.50
|
10.0
|
6.86
|
|
7×2.5
|
19/0.41
|
0.40
|
2.80
|
0.50
|
10.0
|
6.86
|
|
8×2.5
|
19/0.41
|
0.40
|
2.80
|
0.60
|
11.0
|
6.86
|
|
10×2.5
|
19/0.41
|
0.40
|
2.80
|
0.70
|
13.20
|
6.86
|
|
注：根据供需双方协议，可以生产其他规格的产品。
|
