Product Structure

-Multiple stranded soft conductor of tinned copper wire

For the performance of tinned copper wire, refer to GB/T4910-2009; for the conductor structure, refer to GB/T3956-2008 or customer requirements

-FEP (fluorinated ethylene propylene) insulation

For the performance of insulating materials, refer to GJB773A-2000; for the dimensions of finished wires and cables, refer to GB/T2951-2008; for the electrical performance of finished wires and cables, refer to GB/T3048-2007

-Silicone rubber sheath

For the performance of sheath materials, refer to GB/T2951-2008; for the outer diameter of finished wires and cables, refer to GB/T2951-2008; for the electrical performance of finished wires and cables, refer to GB/T3048-2007

Technical Data

Temperature range: -65~＋200℃\nRated voltage: U₀/U 600V\nTest voltage: 2000V\nInsulation resistance: At 20℃, it should not be less than 1.0×10³MΩ·km\nRadiation resistance: up to 1x10⁶ cJ/kg (up to 1 Mrad)

Product Features

· Excellent corrosion resistance, resistant to oils, strong acids, strong alkalis, strong oxidants, and microorganisms; prevents any fungal formation, etc.

· Excellent electrical insulation properties, with low and nearly frequency-independent dielectric characteristics; high voltage resistance, low high-frequency loss, non-hygroscopic, water absorption rate < 0.01%; Minimum water vapor permeability (approx. 0.18 mgr/cm² over 24 hours), high insulation resistance.

· Non-flammable, self-extinguishing. Flame retardancy test complies with DIN VDE 0482 Part 265-2-1 / EN 50265-2-1 / IEC 60332-1 (equivalent to DIN VDE 0472 Part 804 Test Method B).

· Free of hazardous substances, compliant with ROHS standards.

Application Scope

· In the electronics industry, can be used for temperature compensation wires, low-temperature/high-temperature heating wires, aging-resistant wires, and flame-retardant wires.

· In the household appliance industry, can be used for internal wiring of air conditioners, microwave ovens, electronic disinfection cabinets, lighting fixtures, etc.

· In high-temperature environments, control cabinets under high heat, brick factories, kitchen equipment, measuring equipment, and the chemical industry.

· High-temperature, high-frequency electronic transmission lines, computer internal connecting wires, aerospace and other special wires, etc.