Product Structure

· Temperature range: -65~＋200℃

· Rated voltage: U0/U no requirement

· Test voltage: 1500V

· Insulation resistance: at 20℃ should not be less than 1.0×10³ MΩ·km

· Radiation resistance: up to 1x10⁶ cJ/kg (up to 1 Mrad)

Technical Data

Temperature range-65~200

Rated voltage U0/U No requirement

Test voltage 1500V

Insulation resistance 20 should not be less than 1.010³ MΩkm

Radiation resistance up to 1x10⁶ cJ/kg (up to 1 Mrad

Product Features

· Excellent corrosion resistance, resistant to oils, strong acids, strong alkalis, strong oxidants, and microorganisms; prevents any fungal formation, etc.

· Excellent electrical insulation properties, with low and nearly frequency-independent dielectric characteristics; high voltage resistance, low high-frequency loss, non-hygroscopic, water absorption rate < 0.01%; Minimum water vapor permeability (approx. 0.18 mgr/cm² over 24 hours), high insulation resistance.

· Non-flammable, self-extinguishing. Flame retardancy test complies with DIN VDE 0482 Part 265-2-1 / EN 50265-2-1 / IEC 60332-1 (equivalent to DIN VDE 0472 Part 804 Test Method B).

· Free of hazardous substances, compliant with ROHS standards.

Application Scope

· In the electronics industry, can be used for temperature compensation wires, low-temperature wires, high-temperature heating wires, aging-resistant wires, and flame-retardant wires.

· In the household appliance industry, can be used for internal wiring of air conditioners, microwave ovens, electronic disinfection cabinets, rice cookers, electric water heaters, electric heaters, electric ovens, electric clay pots, lighting fixtures, etc.

· Used for installation in control cabinets affected by high heat, as well as in brick factories, heaters, kitchen equipment, measuring equipment, and the chemical industry.

· Electronic equipment transmission lines used under high temperature and high frequency, internal connecting wires for electronic computers, aerospace wires, and other special purpose installation wires, oil well logging cables, submersible motor winding wires, micro-motor lead wires, etc.